Vinotemp 2500CD Specifikace Strana 1

wwwwww..wwiinneemmaattee..ccoomm Wine Cooling System Installation, Use & Care Manual WM-1500CD WM-1500CTED WM-2500CD WM-2500CTED www

- 9 - Fig. 2.7 MOUNTING COOLING UNIT Fig. 2.8 INSTALLING WALL GR

- 10 -Temperature and Humidity 1. The controller Fig. 3.1 TEMPERATUR

- 11 -4) Alarm Signals The alarm codes are described as follows. ME

- 12 -6. Parameter Programming 1) Press and hold the SET + keys unti

- 13 -In case there is excessive frost, the parameters FnC = C-y, idF

- 14 -Care Guide 1. Cleaning Condenser • Clean the condenser regul

- 15 -Troubleshooting This Troubleshooting Chart is not prepared to r

- 16 -high or not cooling and running continually b. Cellar too la

- 17 -low b. Low ambient temperature c. Air probe fault d. Temperatu

- 18 -Wiring Diagram Fig. 6.1 WIRING DIAGRAM

- 1 -Important Safety Information • DO NOT PLUG IN UNTIL 24 HOURS AF

- 19 - Fig. 6.2 WIRING DIAGRAM (ALARM CALL)

- 20 -Customer Support If you need further assistance, please contact

- 21 -Warranty Thank you for choosing a Vinotemp cooling unit. Ple

- 22 -is determined to be faulty and is within the twelve month warran

- 2 -Table of Contents Features & Specifications…………….………….………….

- 3 -Features and Specifications • WM-1500CD, CTED and WM-2500CD, CT

- 4 - Fig. 1.2 DIMENSIONS (in) The specifications and dimensions are

- 5 -Installation Instructions NOTES: • Mounting brackets, screws, g

- 6 - Fig. 2.1 CUTOUT AND HOLE DIMENSIONS • The cooling unit produ

- 7 -• Place the gaskets (1/2” foam tape) on the gasket lips (see Fig

- 8 - Fig. 2.4 MOUNTING SCREW INSERTS Fig. 2.5 REAR EXHAUST GASKET