Vinotemp VT-DIAMONDBIN Návod k použití a péči stáhnout pdf

1. Insert wood pegs into both side panels.

2. Connect top panels to the side panels using the wood

pegs.

3. With a Phillips head screwdriver, screw the top and

bottom panel into the side panels using the 12 screws

included.

4. Connect the two X panels together in an X pattern

as shown.

5. Place the assembled X panels into the nished frame.

If you have difculty doing this, loosen the screws on

the top, place the X panels in the frame and then

tighten the screws again.

ASSEMBLY INSTRUCTIONS

X-BINS (VT-DIAMONDBIN)

17621 S. Susana Road | Rancho Dominguez | CA | 90221 | www.vinotemp.com

1.800.777.8466 | Fax: 310.866.3310

Contents of Box:

12 Screws

8 Wood pegs

2 Side panels (smaller package)

2 Top/bottom panels (medium package)

2 X Panels (large package)

STEP 1, 2, & 3

STEP 4

STEP 5

FINISHED X-BIN

* A Phillips head screwdriver is required for asembly

1. Insert wood pegs into both side panels.2. Connect top panels to the side panels using the wood pegs.3. With a Phillips head screwdriver, screw the

Žádné komentáře

Vinotemp VT-DIAMONDBIN Návod k použití a péči